Home > Attachments > Excavator Attachments > Brush Cutters

Excavator Brush Cutters by TGEC

TGEC designs and builds hydraulic brush cutters for excavators—purpose-built for land clearing, vegetation management, right-of-way maintenance, and site prep. The lineup covers mini to mid-size excavators from 3 to 10 tons, with six models offering cutting widths from 40 to 60 inches and the capacity to cut brush and woody vegetation up to 6 inches in diameter, depending on model and material conditions. As a direct manufacturer, TGEC supplies brush cutters to equipment dealers, vegetation contractors, and qualified OEM partners with factory-direct production and sourcing support.

You may also hear these attachments referred to as brush hogs or rotary cutters—terms commonly used across the industry for excavator-mounted vegetation-cutting equipment. TGEC's brush cutter solutions cover both standard-flow and high-flow hydraulic configurations across the full mini to mid-size excavator range.

Recommended Products

Check out the TGEC excavator brush cutter lineup below. Each model is matched to specific excavator classes and hydraulic flow requirements. Click through to a product page for full specs, applications, and fitment details.

Brush hog attachment

A total of 1 pages 1

Application Scenarios

Land clearing and site prep: Clear brush, small trees, and woody vegetation during construction site prep, property clearing, and development projects.
Right-of-way maintenance: Keep vegetation in check along roads, utility corridors, pipelines, and railway rights-of-way where access and visibility need to stay clear.
Vegetation management: Tackle overgrown brush, invasive species, and woody growth on commercial, agricultural, and municipal properties.
Woodland and tree-farm maintenance: Clear underbrush, small trees, and woody debris in managed woodlands, tree farm thinning, and selective forestry undergrowth control.
Storm and disaster cleanup: Process fallen branches, brush, and storm-damaged vegetation during site cleanup and recovery efforts.

Machine Compatibility

TGEC excavator brush cutters are available for excavator operating classes from 3 to 10 tons. Standard-flow models require 13 to 28 gpm of auxiliary hydraulic flow, while high-flow variants need 19 to 35 gpm. Getting the flow right is essential—matching the brush cutter to the correct hydraulic output ensures optimal cutting performance and keeps your carrier from being overworked.

Final compatibility depends on the specific brush cutter model, excavator specs, mounting configuration, and hydraulic requirements. Check the product page for detailed machine matching info. If you're not sure which model fits your machine, send your excavator model, operating weight, and auxiliary hydraulic flow, and our team will take it from there.

OEM & Bulk Supply

As a direct manufacturer, TGEC supplies excavator brush cutter attachments to equipment dealers, vegetation contractors, and qualified OEM partners. Dealer and bulk-supply programs can be arranged based on model selection, order volume, machine requirements, and project specs. OEM and private-label requests are also welcome—we can handle custom paint, branding, and packaging subject to production feasibility.

Frequently Asked Questions

What is an excavator brush cutter used for?+

An excavator brush cutter is a hydraulic attachment that uses rotating blades to cut and mulch brush, small trees and woody vegetation. It is commonly used for land clearing, right-of-way maintenance, vegetation management, forestry underbrush clearing and storm cleanup. The attachment mounts to the excavator boom in place of the bucket and is powered by the machine auxiliary hydraulic circuit.

What is the difference between an excavator brush cutter, brush hog, and rotary cutter?+

In the field, brush cutter, brush hog, and rotary cutter are often used interchangeably to describe a hydraulic excavator attachment that uses rotating blades to cut brush, small trees, and woody vegetation. The exact terminology can vary by region and manufacturer, but the core function—mounting to the excavator boom and cutting vegetation via the auxiliary hydraulic circuit—is the same. For heavier forestry material or fine grass mulching, separate attachment categories such as mulchers or flail mowers are typically used instead.

How do I choose a brush cutter for an excavator?+

Start by matching the brush cutter to your excavator operating weight and auxiliary hydraulic flow. Standard-flow models work with lower-flow carriers, while high-flow models require more hydraulic output for larger cutting widths and heavier vegetation. Next, consider the typical brush diameter you need to cut and select a model with a suitable maximum cutting capacity. Finally, verify mounting compatibility with your excavator pin dimensions or quick coupler type. Providing your excavator make, model, weight and hydraulic specs ensures the correct model is selected.

What hydraulic flow does an excavator brush cutter require?+

Hydraulic flow requirements depend on the model. TGEC standard-flow brush cutters are designed for carriers with 13 to 28 gpm of auxiliary hydraulic flow, while high-flow models require 19 to 35 gpm. Matching the attachment to the machine's hydraulic output is critical—too little flow results in poor cutting performance and stalling under load, while excessive flow can damage the attachment motor. Always verify your excavator's auxiliary hydraulic flow against the model specifications before ordering.

Does TGEC provide OEM excavator brush cutter solutions?+

Yes. TGEC offers OEM and private-label supply for excavator brush cutter attachments, including custom paint, branding, and packaging subject to production feasibility. Custom mounting brackets for specific excavator brands and quick-coupler interfaces can also be evaluated. Contact our sales team with your company details, target market, estimated volume, and branding requirements for a customized OEM proposal.

Request a Quote — TGEC Excavator Brush Cutters

To request a quote, send us your excavator details (make, model, weight, hydraulic flow/pressure, pin dimensions, coupler type), the model you’re interested in (TG-BC40/50/60, standard or high-flow), your application, typical brush size, and quantity. We’ll confirm the right fit, check hydraulic compatibility, and reply with a factory-direct quote and lead time.

Get A Quote Now