Home > Brands > Excavator > Kobelco

Kobelco Excavator Attachments by TGEC

Kobelco excavators are recognized worldwide for their Japanese engineering, reliable hydraulic performance and specialized application range across construction, demolition, scrap handling and quarry work, with the SK-Series spanning compact utility machines to large production-class units. TianGe manufactures the TGEC line of Kobelco excavator attachments — buckets, hydraulic breakers, grapples, rippers, pulverizers and quick couplers — built around the excavator's mounting geometry, pin configuration and auxiliary hydraulics, then shipped factory-direct to construction contractors, demolition operators, scrap handlers and equipment dealers worldwide.

With Kobelco machines operating across construction, demolition, scrap handling, quarry and infrastructure environments, attachment selection depends heavily on machine class, hydraulic output and the specific mounting configuration — factors TGEC addresses through model-specific mounting setups rather than a one-size-fits-all catalog. Each attachment is matched to the carrier's confirmed specifications, including auxiliary flow, operating pressure and attachment circuit requirements.

Kobelco's SK-Series is known for three distinct strengths: the SR (short radius) models commonly used for urban demolition and utility work, the LC (long carriage) variants that provide exceptional stability for heavy lifting, and the scrap-handling configurations found in recycling yards worldwide. Each variant demands a different attachment strategy — knowing which SK family your machine belongs to is the first step toward the right tool.

Kobelco Excavator Models

Mini Excavators — Standard

Kobelco SK60-8 Excavator · Kobelco SK75-8 Excavator

Mini Excavators — Compact Radius (CR)

Kobelco SK55SRX Mini Excavator · Kobelco SK85CS-7 Excavator

Medium Excavators

Kobelco SK130-8 Excavator · Kobelco SK140SR-7 Excavator · Kobelco SK170LC-10 Excavator · Kobelco SK200-8 Excavator · Kobelco SK210LC-10 Excavator · Kobelco SK250-8 Excavator · Kobelco SK260LC-10 Excavator

Large Excavators

Kobelco SK300-8 Excavator · Kobelco SK350LC-10 Excavator · Kobelco SK380SRLC-7 Excavator · Kobelco SK400D-10 Excavator · Kobelco SK500LC-10 Excavator

Kobelco offers both current and non‑current excavator models. Custom attachments are available for other Kobelco models and configurations based on machine specifications — including older SK-Series and Mark-4, Mark-6, and Mark-8 variants.

Kobelco Compatible Attachments

Home 567 Last

How to Select Attachments for Kobelco Excavator Classes

Kobelco's SK-Series is built around three core engineering philosophies: Japanese engineering and hydraulic design, high-pressure hydraulic efficiency, and application-specific chassis design. The SR (short radius) models — SK55SRX, SK85CS-7, SK140SR-7, and SK380SRLC-7 — feature reduced rear swing for urban jobsites where clearance is tight. These machines use compact pin configurations; auxiliary hydraulic flow and pressure must be confirmed for each specific SR model and attachment combination. Attachments for SR models must preserve the machine's tight swing radius — TGEC verifies rear-swing clearance on every SR-attachment combination.

The LC (long carriage) models — SK170LC-10, SK210LC-10, SK260LC-10, SK350LC-10, and SK500LC-10 — feature extended track frames and heavier counterweights, providing exceptional stability for heavy lifting, deep digging, and large breaker applications. TGEC sizes LC attachments to the machine's extended track frame and heavier counterweights, maximizing lifting and digging potential within the rated operating capacity.

The SK200-8, SK250-8, and SK300-8 represent Kobelco's standard medium-large class — balancing mobility, power, and versatility. These models support a range of breaker sizes, heavy buckets, and demolition grapples for construction and quarry work — TGEC matches breaker flow and weight to the specific machine's hydraulic rating. The SK400D-10 is Kobelco's heavy-duty production machine, built for continuous quarry and large-scale demolition work — attachments for this model feature reinforced structures, larger pins, and heavier wear materials to handle the extended duty cycles and higher impact forces.

Scrap handling deserves special attention — Kobelco machines are widely used in recycling yards, where grapples, magnets, and specialized buckets replace standard digging tools. TGEC offers scrap-specific attachments with reinforced arms, high-cycle hydraulic circuits, and abrasion-resistant materials to withstand the continuous demands of material processing. Reach out to TGEC with your Kobelco model and application, and we'll confirm the correct attachment configuration.

Frequently Asked Questions

Which Kobelco excavators are compatible with TGEC attachments?+

TGEC offers attachments for the Kobelco SK-Series models listed above, from the compact SK55SRX to the large SK500LC-10. Actual compatibility depends on hydraulic flow, operating weight, mounting dimensions (pin-on or quick coupler), and auxiliary circuit configuration. Send us your machine model and serial number for confirmation.

What's the difference between SR, LC, and standard SK models for attachment selection?+

SR (short radius) models feature reduced rear swing for urban work — attachments must preserve swing clearance. LC (long carriage) models have extended track frames for added stability and can accommodate heavier attachments than standard SK models. Standard SK models balance mobility and power for general construction. TGEC sizes and configures attachments specifically for each variant.

Can I use the same attachments across different SK generations (Mark-4, -6, -8, -10)?+

Generally, no — pin sizes, ear spacing, and bushing dimensions changed significantly between Kobelco generations. Mark-4 and Mark-6 machines use different pin diameters than -8 and -10 series. TGEC builds attachments to your specific machine's specs — always provide your model and serial number so we can confirm the correct mounting dimensions.

Does TGEC provide scrap-handling attachments for Kobelco excavators?+

Yes — Kobelco excavators are widely used in recycling and scrap yards. TGEC offers scrap grapples, magnets, and specialized buckets with reinforced structures, high-cycle hydraulics, and abrasion-resistant materials. We can also supply quick couplers optimized for scrap-handling duty cycles.

What custom Kobelco attachment options does TGEC offer?+

TGEC offers full customization for Kobelco excavator attachments — from specialized bucket widths and wear packages to custom breaker tool diameters, grapple jaw configurations, pulverizer designs, and quick coupler adapters. We also offer SR-specific swing-clearance verification and LC-stability optimized configurations. Provide your Kobelco model, hydraulic specs, and job description, and our engineering team will design an attachment that fits your exact application.

Request Pricing for Kobelco Excavator Attachments

Outfitting Kobelco SK-Series excavators for demolition, scrap handling or quarry work? Share your machine model, mounting setup and the applications you serve — we'll configure breakers, grapples, buckets and pulverizers that match Kobelco's hydraulic system and hold up under continuous professional use. Contact us for factory-direct pricing and dealer support.

Get A Quote Now