Buying Guides

Short answer: yes, a skid steer can dig. But the real answer depends on what attachment you're running and what your machine's hydraulic system can deliver. A standard bucket will scrape and move topsoil, but for real excavation—footings, trenches, deep holes—you need a dedicated digging attachment. Backhoe...

Picking the right skid steer backhoe attachment is about matching specs to your machine's hydraulic capacity and the digging work you do day in and day out. The big ones to get right: hydraulic flow and pressure compatibility, digging depth and reach, bucket width, thumb setup, mounting system, and total attach...

Picking between a backhoe and a skid steer really comes down to what you dig most, where you're working, and whether you want a one-trick pony or a Swiss Army knife. Backhoes are purpose-built excavators with a rear digging arm and a front loader bucket. Skid steers are compact, nimble loaders that can take on ...

How deep can a skid steer auger actually go? The short answer: it depends on your stem length, whether you're using extensions, your machine's lift height, the ground you're drilling in, and how rigid your setup is. Standard configurations get you about 0.9 m to 1.2 m without extensions—plenty for most ...

Hydraulic flow is what makes a skid steer auger do its job. The drive converts your carrier's auxiliary flow into rotational torque, and if those numbers don't line up, you'll see it in the performance—slow drilling, stalling, or premature wear on the motor and seals. This guide breaks down how flow wor...

Getting the auger bit diameter right is one of the most critical calls you'll make when speccing out a skid steer auger attachment. The diameter dictates hole size, torque demand, drilling speed, and whether the finished hole meets code for posts, footings, or utility runs. Go too small and the post or footing ...

Picking the right skid steer auger attachment isn't complicated—you just need to match the tool to the job, the machine, and the ground you're drilling in. Get it right, and you'll drill clean, straight holes with minimal strain on your carrier. Get it wrong, and you're looking at slow production, d...

Setting utility poles has long depended on truck-mounted derricks, but a skid steer with the right attachment often does the job more efficiently — especially in tight rights-of-way, rough terrain, or on jobs where a full-size derrick truck can't reach. This guide covers the workflow from site prep through fina...