Product Overview
The TGEC excavator hydraulic auger drive turns your excavator into a serious earth-drilling machine. It replaces the bucket on the boom, ties into the auxiliary hydraulic circuit, and uses a hydraulic motor with gear reduction to deliver high torque at low speed. The output shaft spins the auger bit, boring clean, round holes in soil, clay, and mixed ground. Part of the TGEC excavator auger lineup, this drive is built for fence posts, sign posts, footings, tree planting, and utility pole installation. Fourteen sizes cover 1.5 to 30 ton excavators with torque from 2510 to 39500 Nm, and each model works with a variety of auger bits, extensions, and adapters. For help picking the right drive and bit combo, check out our auger selection guide.
Available Configurations & Models
Fourteen models span excavators from 1.5 to 30 tons. Output shaft connections include 65mm round (65Rd), 75mm square (75Sq), 95mm square (95Sq), and 110mm square (110Sq).
| Model | Excavator Class | Max Torque | Working Pressure | Required Flow | Rotation Speed | Output Shaft | Dimensions | Weight |
|---|---|---|---|---|---|---|---|---|
| TG-EG2000 | 1.5–3 t (1.65–3.3 ton) | 2510 Nm (1851 ft-lb) | 80–170 bar (1160–2465 psi) | 40–75 L/min (10.6–19.8 GPM) | 30–65 rpm | 65Rd | Φ200×585 mm (Φ7.9×23 in) | 55 kg (121 lb) |
| TG-EG3000 | 2–4 t (2.2–4.4 ton) | 3100 Nm (2286 ft-lb) | 80–170 bar (1160–2465 psi) | 40–75 L/min (10.6–19.8 GPM) | 30–65 rpm | 65Rd | Φ200×585 mm (Φ7.9×23 in) | 58 kg (128 lb) |
| TG-EG4000 | 2.5–4.5 t (2.75–4.95 ton) | 3760 Nm (2773 ft-lb) | 80–170 bar (1160–2465 psi) | 40–75 L/min (10.6–19.8 GPM) | 25–40 rpm | 65Rd | Φ200×585 mm (Φ7.9×23 in) | 60 kg (132 lb) |
| TG-EG5500 | 3–6 t (3.3–6.6 ton) | 5600 Nm (4130 ft-lb) | 80–190 bar (1160–2755 psi) | 60–95 L/min (15.9–25.1 GPM) | 40–60 rpm | 75Sq | Φ270×900 mm (Φ10.6×35.4 in) | 127 kg (280 lb) |
| TG-EG7000 | 4.5–6 t (4.95–6.6 ton) | 7300 Nm (5384 ft-lb) | 100–200 bar (1450–2900 psi) | 60–95 L/min (15.9–25.1 GPM) | 34–52 rpm | 75Sq | Φ270×900 mm (Φ10.6×35.4 in) | 130 kg (287 lb) |
| TG-EG8000 | 5–8 t (5.5–8.8 ton) | 8250 Nm (6085 ft-lb) | 100–200 bar (1450–2900 psi) | 80–150 L/min (21.1–39.6 GPM) | 20–60 rpm | 75Sq | Φ270×900 mm (Φ10.6×35.4 in) | 135 kg (298 lb) |
| TG-EG9000 | 3–7 t (3.3–7.7 ton) | 8760 Nm (6461 ft-lb) | 80–170 bar (1160–2465 psi) | 40–75 L/min (10.6–19.8 GPM) | 13–28 rpm | 75Sq | Φ270×870 mm (Φ10.6×34.3 in) | 122 kg (269 lb) |
| TG-EG10000 | 3–10 t (3.3–11 ton) | 10250 Nm (7560 ft-lb) | 80–170 bar (1160–2465 psi) | 40–75 L/min (10.6–19.8 GPM) | 12–23 rpm | 75Sq | Φ270×870 mm (Φ10.6×34.3 in) | 125 kg (276 lb) |
| TG-EG12000 | 13–17 t (14.3–18.7 ton) | 12300 Nm (9072 ft-lb) | 100–210 bar (1450–3045 psi) | 80–150 L/min (21.1–39.6 GPM) | 17–40 rpm | 75Sq | Φ290×945 mm (Φ11.4×37.2 in) | 177 kg (390 lb) |
| TG-EG15000 | 15–17 t (16.5–18.7 ton) | 15160 Nm (11181 ft-lb) | 100–210 bar (1450–3045 psi) | 80–150 L/min (21.1–39.6 GPM) | 15–33 rpm | 75Sq | Φ300×945 mm (Φ11.8×37.2 in) | 180 kg (397 lb) |
| TG-EG20000 | 15–20 t (16.5–22 ton) | 19200 Nm (14160 ft-lb) | 110–230 bar (1595–3335 psi) | 80–150 L/min (21.1–39.6 GPM) | 12–25 rpm | 95Sq | Φ345×1155 mm (Φ13.6×45.5 in) | 266 kg (586 lb) |
| TG-EG25000 | 17–30 t (18.7–33 ton) | 24920 Nm (18380 ft-lb) | 110–230 bar (1595–3335 psi) | 80–150 L/min (21.1–39.6 GPM) | 10–20 rpm | 95Sq | Φ345×1155 mm (Φ13.6×45.5 in) | 272 kg (600 lb) |
| TG-EG30000 | 17–25 t (18.7–27.5 ton) | 31500 Nm (23235 ft-lb) | 100–170 bar (1450–2465 psi) | 100–150 L/min (26.4–39.6 GPM) | 13–17 rpm | 110Sq | Φ460×1600 mm (Φ18.1×63 in) | 485 kg (1069 lb) |
| TG-EG40000 | 17–25 t (18.7–27.5 ton) | 39500 Nm (29134 ft-lb) | 100–170 bar (1450–2465 psi) | 100–150 L/min (26.4–39.6 GPM) | 11–15 rpm | 110Sq | Φ460×1600 mm (Φ18.1×63 in) | 485 kg (1069 lb) |
Table data is for reference only. Actual specifications may vary based on the final configuration. Please contact the TianGe technical team for details.
Series-Wide Technical Highlights
Hydraulic motor with gear reduction delivers high torque at low rotational speed for efficient earth drilling across all fourteen models.
Output shaft options include 65mm round and 75mm, 95mm, 110mm square connections to match the corresponding auger bit interfaces.
High-strength alloy steel housing with precision-machined gear sets and heat-treated components for durable performance in soil, clay and mixed ground.
Custom mounting brackets available for pin-on and quick-coupler configurations across a wide range of excavator makes and models.
Compatible with standard earth bits, clay bits, rock bits, extension shafts and adapters for different hole diameters, depths and ground conditions.
Excavator Compatibility Guidance
TGEC auger drives cover excavators from 1.5 to 30 tons. Each model has specific hydraulic flow and pressure requirements, and the excavator needs an auxiliary circuit to power the drive motor. The TG-EG2000 requires 40 to 75 L/min at 80 to 170 bar, while the TG-EG30000 requires 100 to 150 L/min at 100 to 170 bar. Drive weight ranges from 55 kg to 485 kg, so mini excavator operators should confirm the machine can handle the drive weight plus drilling load at working reach. Custom mounting brackets are supplied for your specific excavator make, model, and pin dimensions.
Typical Applications
Fence and post installation: Drill consistent round holes for wood, metal and vinyl fence posts, sign posts and guardrail posts.
Footings and foundations: Drill pier holes for deck footings, building foundations, pole barns and structural supports.
Tree planting and landscaping: Drill holes for tree and shrub planting in compacted soil or large-scale landscaping projects.
Utility and municipal work: Drill holes for utility poles, street light bases and traffic signal foundations.
Agricultural installation: Drill post holes for farm fencing, livestock enclosures and pole barns.
Working Principle
Pressurized hydraulic fluid from the excavator's auxiliary circuit drives the motor shaft, which feeds into a gear reduction set that drops speed and multiplies torque. The output shaft transfers that torque to the auger bit, where cutting teeth bore into the ground and spiral flights carry spoils up and out of the hole. The excavator boom provides down-pressure and lift while the operator regulates hydraulic flow to control drilling speed. High-torque, low-speed output is essential—too much speed without enough torque just spins the bit in place without penetrating, especially in compacted or clay soil.
Dealer & Bulk Orders
TGEC supplies hydraulic auger drives factory-direct to equipment dealers, rental companies, and attachment distributors through wholesale programs with volume pricing, dedicated account management, and production support for bulk orders. Auger bits, extensions, adapters, and wear parts are available for bulk ordering. OEM and private-label production is available with custom paint colors, logo placement, packaging, and documentation. Contact the TGEC dealer sales team with your company information and estimated annual volume to set up a wholesale account.
Request a Quote — Excavator Hydraulic Auger Drive
Tell us your excavator make and model, operating weight, auxiliary hydraulic flow and pressure, preferred model (TG-EG2000 through TG-EG40000), required auger bit diameter and type, mounting or coupler type, primary application, and the quantity you need. Our team will confirm the right drive model and mounting bracket, verify hydraulic compatibility, and send you a quote based on your specs and delivery terms.
Dealer and OEM inquiries: Contact TGEC to discuss volume supply, custom configurations, private-label requirements, and long-term sourcing programs.
