Welcome to the Official Website of TianGe Attachments.

Follow us:
EnglishEnglish
Skid Steer Stump Grinder

Skid Steer Stump Grinder

TGEC TG-SG540-MP600 skid steer stump grinder with 550 mm working width, 60 L/min hydraulic flow and 16 MPa operating pressure. Universal quick-attach mount, 184 kg. For stump removal in landscaping, site preparation and land clearing.
Product Name: Stump Grinder / Hydraulic Stump Grinder / Stump Cutter / Stump Grinder Attachment
Type: Stump Grinders
After-sales Service: Provided
Warranty: 1 Year
Customization: Available
Shipping Cost: Negotiate with us about shipping cost and estimated delivery time.
Get a quote
WhatsApp
Overview
FAQ

Product Overview

A skid steer stump grinder turns weeks of digging and hauling into an afternoon of grinding. The TG-SG540-MP600 connects to your machine's universal quick-attach plate and runs on standard-flow hydraulics, letting you reduce stumps to fine mulch without excavating. Landscapers use it after tree removals, contractors bring it to development sites, and tree service crews rely on it for cleanup after storm work. The carbide-tipped cutting wheel pulverizes wood below grade, so you can seed, pave, or grade right over the spot.

The 550 mm working width covers most residential and commercial stumps efficiently, while the 184 kg weight keeps the attachment manageable for mid-size skid steers. A reinforced steel frame and a hydraulic motor rated at 60 L/min and 16 MPa provide consistent cutting power across a range of wood species and moisture levels. For a broader view of available configurations, see the full skid steer stump grinder attachments range, and check our best skid steer stump grinder guide for a side-by-side comparison of key features.

Technical Specifications

Parameter TG-SG540-MP600
Model TG-SG540-MP600
Overall Dimensions (W×D×H) 863×621×933 mm (34.0×24.4×36.7 in)
Working Width 550 mm (21.7 in)
Operating Pressure 16 MPa (2320 psi)
Rated Hydraulic Flow 60 L/min (15.9 GPM)
Weight 184 kg (406 lb)
Mounting System Universal Quick-Attach

Table data is for reference only. Actual specifications may vary based on the final configuration. Please contact the TianGe technical team for details.

TGEC TG-SG540-MP600 Skid Steer Stump Grinder – CAD Dimensions and Mounting Layout

How It Works

Hydraulic fluid from the skid steer's auxiliary circuit drives a motor that spins a cutting wheel fitted with carbide-tipped teeth. As you maneuver the attachment into the stump, the teeth chew through wood from the top down, converting it to mulch that stays in place or can be swept away. The boom and tilt controls let you adjust cutting depth and angle on the fly, while the auxiliary flow keeps the wheel speed consistent under load. You can grind a stump as deep as you need, then backfill the hole or leave it ready for topsoil.

Application Scenarios

  • Residential stump removal: Grind tree stumps in yards and gardens after tree removal or storm damage to prepare the ground for landscaping, sod installation or construction.

  • Commercial site preparation: Remove stumps on construction sites, parking lots and development parcels before grading, excavation or paving work begins.

  • Landscaping and tree service: Support professional tree care companies with efficient stump grinding as a follow-up service to tree removal and pruning contracts.

  • Land clearing and forestry: Clear stumps in wooded lots, hunting properties and recreational land to improve access, reduce fire hazard and prepare for reforestation or pasture conversion.

  • Farm and ranch maintenance: Remove stumps in pastures, fence rows and field edges to expand usable acreage, improve mowing efficiency and reduce equipment damage risk.

  • Municipal and utility work: Grind stumps along roadways, utility easements and public spaces where right-of-way clearance or vegetation management is required.

Installation & Mounting

The TG-SG540-MP600 uses the universal quick-attach system, so you can connect it without tools. Before you mount it, confirm that your skid steer delivers at least 60 L/min at the auxiliary ports and that the system pressure stays within range of the 16 MPa rating. Connect the hydraulic hoses, cycle the auxiliary circuit briefly to check for leaks and correct motor rotation, and you're ready to work. If you're unsure about your machine's hydraulic specs, our standard vs. high flow stump grinder guide explains how flow rates affect performance and compatibility.

Wear & Service

The cutting teeth take the most wear—check them regularly for chipped or missing carbide, and replace individual teeth as needed rather than waiting for the whole set to fail. The hydraulic motor, drive bearings, and hoses also need periodic inspection: look for leaks, listen for unusual noise, and feel for excessive heat. Grease the frame pins and bushings according to the maintenance schedule. Genuine replacement teeth, seals, and hose kits are available for all TGEC models, and keeping spares on hand minimizes downtime during busy seasons.

OEM & Bulk Supply

TGEC supplies the TG-SG540-MP600 to equipment dealers, distributors and rental companies through OEM and bulk-supply programs. Standard configurations are produced with consistent dimensions, verified hydraulic components and quality inspection at each stage. For qualified orders, TGEC can review custom requirements such as modified mounting frames, alternative hydraulic configurations, custom paint or branded packaging. Dealers can combine stump grinder orders with other TGEC attachment products to simplify sourcing and shipping.

Which Stumps Are You Grinding — and What's Your Skid Steer Setup?

We'll need your skid steer make and model, auxiliary flow and pressure (60 L/min and 16 MPa recommended), and a sense of the stump sizes and species you handle most — softwoods, hardwoods, or a mix. Also let us know if you need custom paint or branding. We'll check the TG-SG540-MP600 against your machine specs, confirm compatibility, and return a factory-direct quote with estimated delivery timing.

Frequently Asked Questions

What type of work is a skid steer stump grinder designed for?+

A skid steer stump grinder is designed specifically for removing tree stumps by grinding them into wood mulch. It is used in residential yard cleanup, commercial site preparation, landscaping contracts, land clearing, farm maintenance and municipal vegetation management. The attachment grinds stumps below ground level so the area can be graded, seeded or paved without obstruction.

What skid steer size is suitable for a stump grinder attachment?+

The TG-SG540-MP600 is suitable for standard-flow skid steers and compact track loaders that can deliver at least 60 L/min of auxiliary hydraulic flow. Generally, this corresponds to mid-size and larger skid steers with sufficient hydraulic capacity. Operators should check their machine's auxiliary flow rating, operating weight and mounting interface before selecting a stump grinder. Mini skid steers may have limited flow and require a separate compatibility review.

What hydraulic flow requirements should be checked before using a stump grinder?+

Before using a stump grinder, verify that your skid steer's auxiliary hydraulic flow meets the attachment's rated requirement of 60 L/min. Also confirm that the operating pressure is compatible with the 16 MPa rating. Inspect the hydraulic hoses and couplers for damage, and ensure the auxiliary circuit is properly engaged. Machines with flow below the requirement may produce slow or ineffective grinding, while excessive pressure can damage the hydraulic motor.

Can a stump grinder be used on a mini skid steer?+

Whether a stump grinder can be used on a mini skid steer depends on the machine's auxiliary hydraulic flow, operating pressure and mounting capacity. The TG-SG540-MP600 requires 60 L/min flow, which many mini skid steers cannot deliver. Mini skid steer operators should consult the machine's specifications and contact TGEC for a compatibility review before attempting to use a full-size stump grinder. A lighter or flow-matched configuration may be required.

What should be checked when mounting a stump grinder to a skid steer?+

When mounting a stump grinder, first confirm that the universal quick-attach plate is clean and free of debris. Align the attachment with the mounting plate and engage the quick-attach locks. Connect the hydraulic hoses to the auxiliary circuit, ensuring the fittings are clean and properly seated. Check for hydraulic leaks before operating. Verify that the skid steer's auxiliary flow and pressure meet the attachment's requirements. Finally, cycle the attachment briefly to confirm proper motor rotation and smooth operation.

How does the stump grinder attach to a skid steer?+

The TG-SG540-MP600 attaches to a skid steer using the universal quick-attach mounting system, which is standard on most modern skid steers and compact track loaders. The operator aligns the skid steer's quick-attach plate with the attachment's mounting frame, tilts the plate forward to engage the hooks, and secures the locking pins. Hydraulic hoses connect to the skid steer's auxiliary hydraulic couplers to power the grinding motor. This system allows fast attachment changes without tools.

What factors affect stump-grinding performance?+

Stump-grinding performance is affected by several factors: the skid steer's auxiliary hydraulic flow and pressure, the condition and sharpness of the carbide cutting teeth, the size and hardness of the stump, the wood species, moisture content, and the presence of rocks or soil in the stump. Adequate hydraulic flow ensures the cutting wheel maintains speed under load. Dull or damaged teeth reduce cutting efficiency and increase strain on the hydraulic motor. Operators should adjust feed rate based on stump density to maintain optimal performance.

How should operators select a stump grinder for different working conditions?+

Operators should select a stump grinder based on their skid steer's hydraulic flow and pressure, the typical stump sizes they encounter, and the working environment. For standard-flow skid steers handling residential and commercial stumps, the TG-SG540-MP600 with 550 mm working width is appropriate. For high-flow machines or large-diameter stumps in forestry applications, a higher-flow configuration may be needed. Consider the attachment weight relative to the skid steer's operating capacity, and verify mounting compatibility. Operators working in rocky or abrasive conditions should prioritize models with easily replaceable carbide teeth.

What stump and ground conditions should be considered before grinding?+

Before grinding, assess the stump diameter, wood species, age and moisture content. Hard, dense woods like oak or hickory require slower feed rates, while softer woods like pine grind more quickly. Check for rocks, nails, wire or other debris embedded in or around the stump, as these can damage cutting teeth. Consider the ground slope and stability, ensuring the skid steer has firm footing. Identify underground utilities, pipes or cables near the stump to avoid damage. Clear the work area of bystanders and loose debris before beginning the grinding operation.

What wear components should be inspected on a stump grinder?+

Key wear components to inspect include the carbide-tipped cutting teeth, the cutting wheel or disc, the hydraulic motor, drive bearings, hydraulic hoses and fittings, and the mounting frame pins and bushings. Check cutting teeth for wear, chipping or missing carbide tips. Inspect the cutting wheel for cracks or excessive wear. Monitor the hydraulic motor for leaks, unusual noise or overheating. Examine hoses for abrasion, cracks or bulging. Lubricate pins and bushings regularly. Addressing worn components promptly prevents costly damage and maintains grinding performance.

How should stump grinder cutting components be maintained?+

Cutting component maintenance starts with regular inspection of the carbide teeth for wear, damage or missing tips. replace individual teeth as needed, or replace the full set when wear is uniform. Keep the cutting wheel clean by removing wood buildup and debris after each use. Inspect the wheel for cracks, bending or excessive wear, and replace it if structural damage is found. Ensure the wheel mounting hardware is properly torqued. Store the attachment in a dry area to prevent corrosion. Use only genuine TGEC replacement teeth and components to maintain performance and warranty coverage.

What should contractors verify before matching a stump grinder to a skid steer?+

Contractors should verify the skid steer's auxiliary hydraulic flow (minimum 60 L/min for the TG-SG540-MP600), operating pressure (compatible with 16 MPa), mounting system (universal quick-attach), and operating weight capacity relative to the 184 kg attachment. Confirm the machine has a properly functioning auxiliary hydraulic circuit with clean couplers. Check that the skid steer's lift capacity can handle the attachment weight plus grinding forces. Review the intended application and typical stump sizes to ensure the 550 mm working width is sufficient. When in doubt, provide the skid steer's make, model and specifications to TGEC for a compatibility verification.
Product Inquiry
Please make sure to include your phone number with the country code (e.g., 86 for China, 1 for USA).

More Related Products Show More