Product Overview
The TGEC weld-on universal mounting plate is a precision-engineered attachment interface built for fabricators, attachment manufacturers, and equipment dealers who need a reliable universal quick-attach mounting solution. Machined from 65mm thick high-strength steel, the plate offers a solid base for attachment fabrication, while its standard 480mm quick-attach height follows the universal quick-attach interface dimension used in this series. As the core product in the TGEC skid steer mounting plates range, it serves as the foundation for building custom attachments or replacing worn interfaces on existing equipment.
Three width options cover the full range of skid steer machine classes: the TG-MP910 (910mm width) for compact and small-frame loaders, the TG-MP1140 (1140mm width) for mid-size machines, and the TG-MP1220 (1220mm width) for large-frame loaders. All three models share the same 65mm plate thickness, 480mm quick-attach height, and weld-on installation type. The plate's flat, weld-ready surface allows fabricators to attach custom frames, brackets, and implements directly, while the precision-cut mounting holes follow the universal quick-attach interface specified for this series.
Technical Specifications
| Parameter | TG-MP910 | TG-MP1140 | TG-MP1220 |
|---|---|---|---|
| Model | TG-MP910 | TG-MP1140 | TG-MP1220 |
| Overall Dimensions (L×W×H) | 910 × 65 × 480 mm / 35.8 × 2.6 × 18.9" | 1140 × 65 × 480 mm / 44.9 × 2.6 × 18.9" | 1220 × 65 × 480 mm / 48.0 × 2.6 × 18.9" |
| Plate Thickness | 65 mm / 2.6" | 65 mm / 2.6" | 65 mm / 2.6" |
| Quick-Attach Height | 480 mm / 18.9" (standard) | 480 mm / 18.9" (standard) | 480 mm / 18.9" (standard) |
| Unit Weight | 22 kg / 49 lb | 29 kg / 64 lb | 31 kg / 68 lb |
| Typical Machine Class | Compact / small-frame | Mid-size | Large-frame |
| Installation Type | Weld-on | Weld-on | Weld-on |
Table data is for reference only. Actual specifications may vary based on the final configuration. Please contact the TianGe technical team for details.
How It Works
The weld-on universal mounting plate serves as the mechanical interface between a skid steer loader and any attachment built or mounted onto it. The plate's front face features the precision-cut universal quick-attach profile that engages with the skid steer's quick-attach coupler — the operator aligns the plate with the coupler, engages the locking levers, and secures the safety pins. The rear face of the plate is a flat, weld-ready surface to which custom attachment frames, brackets, or implements are welded directly. The 65mm thickness gives the fabricator a substantial steel section to work with, while the standard 480mm quick-attach height helps achieve a proper mounting position according to the interface and attachment design.
Application Scenarios
Fabricating custom skid steer attachments from raw steel or existing implements
Replacing damaged or worn quick-attach mounting plates on existing attachments
Converting non-skid-steer equipment to universal quick-attach compatibility
Building attachment prototypes for new product development and testing
Repair and rebuild work in equipment dealership service departments
Custom attachment shops serving landscaping, construction, and agricultural contractors
Reinforcing or upgrading thin or undersized mounting plates on imported attachments
Installation & Mounting
Weld-on installation requires a qualified welder and proper welding equipment. Before welding, position the plate on a flat, level surface and align the attachment frame or implement to the desired position on the plate's rear face. Verify that the quick-attach profile on the front face is not obstructed and that the plate remains square to the attachment frame. Use tack welds to secure the initial position, then check alignment with a square and level before completing full welds. Weld size and joint type should be determined according to the attachment design, steel grade, load requirements, and approved welding procedures. After welding, allow the assembly to cool slowly, then grind any excess weld material as needed. Finally, test-fit the plate on a skid steer quick-attach coupler to verify proper engagement before putting the attachment into service.
Wear & Service
The mounting plate itself is a low-wear component, but the quick-attach profile and locking pin holes are subject to gradual wear from repeated attachment changes. Inspect the quick-attach profile edges for deformation or mushrooming that could affect secure coupler engagement. Check the locking pin holes for elongation or wear that could reduce pin retention. Inspect all welds connecting the plate to the attachment frame for cracking or fatigue, particularly after heavy use. Clean the plate surface regularly to remove dirt, rust, and debris that could interfere with coupler engagement. Touch up any scratched or chipped paint to prevent corrosion. If the quick-attach profile becomes significantly worn or deformed, the plate should be replaced rather than repaired, as structural integrity may be compromised.
OEM & Bulk Supply
TGEC supplies weld-on universal mounting plates to attachment manufacturers, dealers, and fabricators through OEM and bulk programs. Volume orders can include custom hole patterns, alternate thicknesses, branded packaging, and private-label supply. Our production facility supports container-level shipping for international B2B buyers, with quality control covering dimensional accuracy and weld prep finish. Quality and material documentation can be provided according to order requirements.
Building custom attachments or replacing worn plates — what's your main need?
And what width do you need — 910mm, 1140mm, or 1220mm? Give us your target quantity, any custom hole patterns or thickness adjustments, and your destination market. We'll confirm the right match and send factory-direct pricing with estimated availability.
