Product Overview
The TGEC two-piece demolition front is built around an articulating boom joint that lets the boom fold at a secondary pivot point — providing variable working height and attachment positioning flexibility through the articulated joint, while remaining more compact than a dedicated high-reach demolition rig. This variable-angle (VA) boom design allows the operator to adjust working height and attachment positioning for a wide range of demolition tasks. Eight models cover machines from 6 to 50 tons, with lift heights ranging from 9.1 meters on the compact TG-DB06-8 up to 21.6 meters on the top-end TG-DB50. As part of the TGEC excavator boom and arm assemblies family, this configuration is designed for mid-height building demolition, interior structural tear-out, and job sites where a full high-reach demolition configuration may not be necessary. For a deeper look at boom configurations and how the pieces fit together, check out our excavator boom types guide and boom vs arm vs stick comparison.
Available Configurations & Models
We offer eight models spanning excavators from 6 to 50 tons. All measurements are approximate and may shift depending on the final build and specific carrier machine.
| Parameter | TG-DB06-8 | TG-DB06-10 | TG-DB12 | TG-DB24 | TG-DB28 | TG-DB36 | TG-DB45 | TG-DB50 |
|---|---|---|---|---|---|---|---|---|
| Excavator Class | 6–8 t (6.6–8.8 ton) | 6–8 t (6.6–8.8 ton) | 10–16 t (11–17.6 ton) | 20–24 t (22–26.4 ton) | 25–28 t (27.5–30.8 ton) | 30–36 t (33–39.6 ton) | 40–45 t (44–49.5 ton) | 45–50 t (49.5–55 ton) |
| Total Length | 8000 mm (26.2 ft) | 10000 mm (32.8 ft) | 12000 mm (39.4 ft) | 15000 mm (49.2 ft) | 18000 mm (59.1 ft) | 22000 mm (72.2 ft) | 22000 mm (72.2 ft) | 24000 mm (78.7 ft) |
| Transport Height | 2800 mm (9.2 ft) | 3000 mm (9.8 ft) | 3000 mm (9.8 ft) | 3300 mm (10.8 ft) | 3400 mm (11.2 ft) | 3400 mm (11.2 ft) | 3400 mm (11.2 ft) | 3400 mm (11.2 ft) |
| Max Lift Height | 9100 mm (29.9 ft) | 11000 mm (36.1 ft) | 13200 mm (43.3 ft) | 16300 mm (53.5 ft) | 17500 mm (57.4 ft) | 19600 mm (64.3 ft) | 19800 mm (65.0 ft) | 21600 mm (70.9 ft) |
| Breaker Rod Diameter | 50 mm (2 in) | 50 mm (2 in) | 68 mm (2.7 in) | 100 mm (3.9 in) | 100 mm (3.9 in) | 100 mm (3.9 in) | 100 mm (3.9 in) | 100 mm (3.9 in) |
| Cylinder Rating | 6 t (6.6 ton) | 6 t (6.6 ton) | 12 t (13.2 ton) | 20 t (22 ton) | 20 t (22 ton) | 22 t (24.2 ton) | 22 t (24.2 ton) | 22 t (24.2 ton) |
| Counterweight | 1 t (1.1 ton) | 1.5–2 t (1.7–2.2 ton) | 1–2 t (1.1–2.2 ton) | 1–2 t (1.1–2.2 ton) | — | 2 t (2.2 ton) | — | — |
The specs above are for general reference. Breaker Rod Diameter indicates the recommended breaker tool shank diameter for each model. Cylinder Rating refers to the hydraulic cylinder force rating per the internal specification. Final numbers depend on the actual configuration. For precise details, reach out to the TianGe technical team.
Series-Wide Technical Highlights
Articulated two-piece boom joint provides variable-angle positioning, allowing the operator to adjust working height and reach during demolition operations.
Lift heights span 9.1 to 21.6 meters across the eight-model lineup for excavators from 6 to 50 tons.
Selected models include counterweight packages configured for the specified machine and working geometry.
Built from high-strength steel with reinforced articulation and pivot areas for demolition applications.
Transport height ranges from 2.8 to 3.4 meters across the series. Confirm trailer requirements and local transport regulations before shipment and site transfer.
Excavator Compatibility Guidance
TGEC two-piece demolition fronts are available for excavators from 6 to 50 tons across eight sizes. The TG-DB06-8 and TG-DB06-10 are designed for 6-to-8-ton mini excavators; the TG-DB12 is designed for 10-to-16-ton machines; the TG-DB24 is designed for 20-to-24-ton units; the TG-DB28 is designed for 25-to-28-ton excavators; the TG-DB36 is designed for 30-to-36-ton machines; the TG-DB45 is designed for 40-to-45-ton units; and the TG-DB50 is designed for 45-to-50-ton excavators. Each assembly is custom-engineered for the specific excavator make and model. When you order, just give us the make and model, operating weight, pin-to-pin spacing, pin diameter, and stick width — our engineering team will take it from there.
Typical Applications
Mid-rise demolition: Take down low- to mid-rise buildings, warehouses, and industrial structures from the top down.
Interior structural removal: Remove interior walls, floors, and columns where exterior access is tight.
Concrete breaking and pulverizing: Break and process concrete slabs, beams, and columns at medium working heights using compatible hydraulic attachments.
Bridge and overpass work: Remove decks, parapets, and approach sections at accessible heights.
Plant dismantling: Dismantle process vessels, pipe racks, and structural steel in industrial facilities.
Working Principle
The boom and arm functions use the excavator's hydraulic system — the main boom cylinder controls the lower section, while a second cylinder manages the articulating joint up top. That variable-angle joint lets the operator fold or reposition the upper boom section, adjusting working height and reach without having to reposition the whole machine. The articulated configuration provides more positioning flexibility than a fixed mono boom, particularly when working around obstacles or at varying working heights. A breaker, pulverizer, or shear mounts at the arm end and is powered through the auxiliary hydraulic circuit. Certain models include a counterweight system configured for the specified machine and working geometry, and the boom sections can be folded for transport, reducing the overall transport height.
Dealer & Bulk Orders
TGEC supplies two-piece demolition fronts direct to demolition contractors, equipment dealers, and structural removal specialists through factory-direct and bulk-supply channels. These programs come with volume discounts, dedicated account management, and flexible production scheduling. Need a custom configuration for a specific excavator brand that's popular in your region? We can make that happen. OEM and private-label runs are available with custom paint, logos, and packaging. Get in touch with the TGEC dealer sales team with your company info, target excavator models, and estimated annual volume to open a wholesale account.
Request a Quote — Excavator Two-Piece Demolition Front
Share your excavator make and model, operating weight, pin-to-pin spacing, pin diameter, stick width, preferred model (TG-DB06-8 through TG-DB50), planned attachment (breaker / pulverizer / shear), primary application, and quantity. Our team will confirm the right setup, verify mounting fit, specify the counterweight if applicable, and get back to you with a factory-direct quote, lead time, and shipping details.
Dealers and OEMs: reach out to TGEC to discuss volume supply, custom configurations, private-label needs, and long-term sourcing agreements.
